How to apply 

tutorial

 

HOW TO APPLY

In this tutorial we sample the best way to work with Full Dip, shown in it you will find instructions for use and recommendations to consider when working with our liquid vinyl.

  

superficie limpia 

Full Dip® SPRAY 400ML APLICATION

1. BEFORE APPLYING 

1.1. TO CLEAR THE SURFACE

Before you start spraying the liquid vinyl shall have the surface where you will apply it completely clean, dry and free of any substance that may be capable of causing non.grip ( as waxes , cleaners etc).

It is advisable to ensure that the surface is neat as possible without waste (such as sand , dust, etc.) Full Dip® it fits perfect to the surface and thus get so that the result is uniform.

1.2. TOLERANCE TEST

Full Dip® Full Dip can be applied to any surface such as metals, plastics, glass, wood, etc.. However it may be a small pre-test.

 

spray

2. APPLICATION Full Dip®

2.1 SHAKE STRONGLY

Shake with vigorously before use. In the first use to move a minute to alrigth mix all the internal elements.

 

2.2 SPRAY IT

Apply the product a few 20cms always parallel to the surface passes. You can apply as many coats as you want , keeping in mind that we will need an average of 4-6 coats, but remember that how more coats yoy apply more resistant will be the result and more easly for peel it.

Between coats must wait at minimum 10-30 minutes. When touch dry in 10-30 minutes, but for a full dry you need wait 12 hours.

(We recommend using mask during application)

 

spray

3. ENJOY

Once the drying time after your piece is ready to use so you only have to shine it as long as desired.

Remember that you can remove Full Dip a later pulling it fully and preserving the intact surface.

 

Full Dip® SPRAYABLE APPLICATION 4L.

 

Before applying Full Dip Sprayable must prepare the surface just as explained above (see paragraph 1 Full Dip Spray 400ml).

Full format Dip 4 liters is ready to use, you need not do any mixing with diluent. To apply this product needs to have a paint gun.

 

spray

1. TO SHAKE

Beat well the product with a palette or spoon to mix for a few minutes, fill up your gun with Full Dip®.

 

2. APLICATION

Apply the product to a 20cm long piece with coats parallel to the surface where they are applying.

We recommend cleaning the spray gun approximately every two barrels. For cleaning you can use universal solvent.

You can apply as many coats as you want , keeping in mind that we will need an average of about 4 coats, but remember that the more will be the finish.

It is important that the first minor amount of paint is applied , the piece covers only slightly, regardless of the amount of paint or covering power. This is important since the first coat serves as a primer of the following if may be more abundant.

Between coats must wait at least 10-30 minutes. After the last coat of paint let dry for 12 hours before handling the painted piece.

(We recommend using mask during application).

 

Depending on the base color and the color to paint, you will need more or less paint . As a general rule, small car two bottles of 4L, compact cars for three or four (usually three bottles) and to large sedans or SUV four or five bottles 4L (cans usually four) are needed.

More
  • Full Dip Bronze Metalizer Get a touch of design and sophistication thanks to this range in metallic finish. Ideal for wheels, or parts that you want to provide a look at gold, aluminum or metallic bronze.  Full Dip the first manufacturer of liquid vinyl designed in Spain.
  • Full Dip Orange FLuor The neon liquid vinyl is fashionable.  Intense orange color, with great sensitivity to light making it visible under all circumstances. Full Dip the first manufacturer of liquid vinyl designed in Spain.
  • Full Dip Gloss Reforcer. Designed to add shine to the matte finish Full Dip products. It can also be used for extra shine throughout the brightness range Full Dip. Dazzle everyone with the intense gloss that only gives you Reforcer Gloss. 
  • Electric HVLP paint equipment specially designed for professional finishing with vinyl paint Full Dip. With the FD650 gun you will be more effective and faster. HVLP designed with a novel system that optimizes the use of paint without waste, with a very high yield.